| Factory torque arms do a great job at robbing horsepower and torque and "dissolving" it into the chassis.
Replace your weak, flexible stamped metal torque arm with a rigid BMR tubular version and put that power where it is supposed to be - the pavement!
Made from MIG welded 1.25" x .120" tubing with heavy 3/8" mounting plates. Bolts directly in place of factory torque arm using all factory mounting locations.
Requires no welding or drilling and clears all factory or aftermarket exhausts. Comes equipped with a rear adjuster for altering pinion angle and a new, low deflection polyurethane front mounting bushing.
Available in your color choice of red, black, silver, navy, white, yellow, or hugger orange. Works on 1982-2001 F-Body('82-'84 requires purchase of '85 or newer torque arm "clamshell" mount)
| Price
|
Product Name
|
Short Description
|
Year / Model
|
|
| 327.67 |
Suspension |
Torque Arm - Bolt In for 93 - 03 / Camaro |
Camaro
93 - 03 |
|
NOTE:This torque arm has been safely tested to 11.0 in the quarter mile and is not recommended beyond. These restrictions are due to the limitations of the transmission tailshaft housing mount, not the torque arm.
If your car exceeds these levels of performance, the BMR Trak Pak or Xtreme Duty torque arm(below) is recommended to remove the stress from the transmission tailshaft.
Order your performance parts in confidence
All our parts are covered by the manufacturers warranty.
Your order is processed through our Bank's very own Secure Server |
